Track skid steer loader TS65

Retate load (kg): 1000kg
Rated power (KW): 55KW
Operation weight (kg): 3800kg
Full length (MM): 3500mm
Full width (MM): 1782mm
The whole machine is high (MM): 2150mm

Classification :

Keywords :

Track skid steer loader TS65

PRODUCT DETAILS

The TS series uses a rubber track walking system. The ground ratio is low. Can adapt to soft ground and mountain driving operations. Equipped with a dual -speed motor, the speed of the host

can reach 18 km/h.

 

Technical characteristics

The TS series uses a rubber track walking system. The ground ratio is low. Can adapt to soft ground and mountain driving operations. Equipped with a dual -speed motor, the speed of the host

can reach 18 km/h.

Configure a high -flow system, with a large flow of 120 liters, 130 -liter/cents, 140 -liter/cents. The rear of the host can be equipped with a loose soil, which is greater than 500mm.

 

Product parameters

A Overall operating height (mm) 3480
B Height to bucket hinge pin (mm) 2900
C height to top of cab (mm) 2150
D Height to bottom of level bucket(mm) 2730
E Overall length ithout bucket(mm) 2750
F overall length with bucket(mm) 3500
G Dumping angle at maximum height(°) 40
H Dumping height(mm) 2230
I Dumping reach(mm) 715
J Rollback o bucket on ground(°) 30
K Rollback of bucket at full height(°) 104
L Wheelbase(mm) 1500
M Ground clearance(mm) 200
N Angleof departure(°) 20
O Front turning radins without bucket(mm) 1298
P Front tuning radius(mm) 2010
Q Rear tuning radius(mm) 1714
R Rear axle to bumper (mm) 890
S Tread width,enterline to centerline (mm) 1462
T Width (mm) 1782
U Bucket width (mm) 1830

 

Model

TS65

Operating load (kg)

1000

Max Speedkm/h

12

Rated flux (L/min)

80

High Flow Flux (L/min)

120

Tiretrackmodel

320×86

Rated power (Kw)

55

Fuel tank capacity (L)

90

self weight bucket (kg)

3800

Bucket capacity (m³)

0.55

FACTORY APPEARANCE

factory
factory
factory

PACKING AND DELIVERY

CHINA SHANGONG CO., LTD.

APPLICATION AREAS

application

application

application

application

application

application

application

application

FAQ

Once the products received by customer were found not comply with the products or contract demands, what will you do?

A: We will compensate the customer for all the loss without any hesitation.

What certifications do your products have?

A: We have ISO 9001, SGS, EWC and other certifications.

What kind of payment terms would you accept?

A: We always do T/T.30% T/T as deposit,70% T/T as balance.

What is the delivery time?

10-15 days

RELATED PRODUCTS


GET A FREE QUOTE